Magna 303 GOLD
Magna 303 GOLD Stainless Steel Electrode welds all steel types
- Super strong, non-cracking alloy for all steel types.
- Brinell hardness: 220 applied and rapidly hardening up to 320.
- A ferrite-balanced, all-steel electrode for welding difficult-to-weld and dissimilar steels.
- Is deployable in versatile applications.
- Welds in all positions.
225 Brinell hardness
Tensile strength weld 128,000 psi (882.53 MPa) up to 186,000 psi (1282 MPa)
Maximum yield strength 90,000 psi (620.53 MPa)
Elongation/Extension : 32%
Properties Magna 303 GOLD Stainless Steel Electrode welds all steel types
Magna 303 GOLD Stainless Steel Electrode welds all steel types eliminates the guesswork from maintenance welding.
- welds all steel types, including mild steel, medium and high carbon steel, spring steel, hard steel, tool steel, and manganese steel.
- is the superior alloy that also welds dissimilar steels together.
- there is minimal to no need for preheating when welding problematic steel.
- provides machinable and hardened weld results with superior strength that withstand heavy shocks and impact.
- welds in all positions, in wet conditions and gives excellent results in both AC and DC applications.
- Tensile strength (after welding) 128,000 psi (882.53 MPa)
- Tensile strength (after hardening) 186,000 psi (1282.42 MPa)
- Brinell 220 (after welding) and 320 (rapid hardening)
Application Magna 303 GOLD
Magna 303 GOLD stainless steel electrode welds all steel types is designed for welding all dissimilar steels such as stainless steel, carbon steel, vanadium spring steel, high-sulfur steel, galvanized steel, manganese steel, tool steel, and die steel. The stick electrode is suitable for welding in all positions on direct current or alternating current.
A major advantage of using Magna 303 Gold is that it eliminates guesswork. In maintenance, a steel of unknown analysis must often be welded. If the welder “guesses” what the steel might be and uses the electrode that might be suitable for that steel, a weld is likely to fail if they guessed incorrectly. If Magna 303 Gold is used, the guesswork is eliminated or at least minimized because this one electrode gives good results on the widest range of dissimilar steel combinations, with the exception of aluminum and copper alloys.
No special preparation is required when using Magna 303 GOLD.
However, a 90° V-joint should be used when welding thicker plates of steel. Also maintain a short arc length and use stringer bead welding.
Packaging
| Article No. | Packaging | Size | Amperage |
| M303E T.I.G. | 2Kg | 1.57mm | 70 – 100 Amps |
| M303N | 2Kg – 4Kg | 2.38mm | 35 – 75 Amps |
| M303M | 2Kg – 4Kg | 3.17mm | 60 – 110 Amps |
| M303L | 2Kg – 4Kg | 3.96mm | 75 – 140 Amps |
